86-532-66968791
No. 107 Yan Yang Road, Cheng Yang District, Qingdao, Shandong, China
High Quality Forged China G80 Galvanized Lifting Chain, Find details about China Lifting Chain, G80 Lifting Chain from High Quality Forged China G80 Galvanized Lifting Chain - Qingdao Thinkwell Hardware & Machinery Co., Ltd.
Diameter |
Pitch |
Outside Width w(mm) |
Gage Length |
Break Load Min (BF/KN) |
|||
d(mm) |
Deviation |
p(mm) |
Deviation |
11*pn |
Deviation |
||
4 | ±0.2 | 12 | +0.25 0 |
13.6 | 132 | +0.6 0 |
20.1 |
5 | ±0.2 | 15 | +0.3 0 |
17.0 | 165 | +0.8 0 |
31.4 |
6 | ±0.2 | 18 | +0.35 0 |
20.0 | 198 | +0.9 0 |
45.2 |
6.3 | ±0.2 | 19 | +0.4 0 |
21 | 209 | +1 0 |
49.8 |
7.1 | ±0.3 | 21 | +0.4 0 |
23 | 231 | +1.1 0 |
61.5 |
8 | ±0.3 | 24 | +0.5 0 |
26 | 264 | +1.3 0 |
80.4 |
9 | ±0.4 | 27 | +0.5 0 |
30 | 297 | +1.4 0 |
101.7 |
10 | ±0.4 | 30 | +0.6 0 |
33 | 330 | +1.6 0 |
125.6 |
11.2 | ±0.4 | 34 | +0.7 0 |
37 | 374 | +1.8 0 |
152.1 |
12.5 | ±0.5 | 38 | +0.8 0 |
41 | 418 | +2.0 0 |
196.3 |
13 | ±0.5 | 39 | +0.8 0 |
44.2 | 429 | +2.1 0 |
212.3 |
14 | ±0.6 | 42 | +0.8 0 |
47.6 | 462 | +2.2 0 |
246.3 |
16 | ±0.6 | 48 | +0.9 0 |
54.4 | 528 | +2.5 0 |
321.6 |
Diameter |
Pitch |
Outside Width w(mm) |
Gage Length |
Break Load Min ( BF/KN ) |
|||
d(mm) |
Deviation |
p(mm) |
Deviation |
11*pn |
Deviation |
||
4 | ±0.2 | 12 | +0.25 0 |
13.6 | 132 | +0.6 0 |
25.1 |
5 | ±0.2 | 15 | +0.3 0 |
17.0 | 165 | +0.8 0 |
39.2 |
6 | ±0.2 | 18 | +0.35 0 |
20.0 | 198 | +0.9 0 |
56.5 |
6.3 | ±0.2 | 19 | +0.4 0 |
21 | 209 | +1 0 |
62.3 |
7.1 | ±0.3 | 21 | +0.4 0 |
23 | 231 | +1.1 0 |
79.1 |
8 | ±0.3 | 24 | +0.5 0 |
26 | 264 | +1.3 0 |
100.5 |
9 | ±0.4 | 27 | +0.5 0 |
30 | 297 | +1.4 0 |
127.2 |
10 | ±0.4 | 30 | +0.6 0 |
33 | 330 | +1.6 0 |
157.1 |
11.2 | ±0.4 | 34 | +0.7 0 |
37 | 374 | +1.8 0 |
197.0 |
12.5 | ±0.5 | 38 | +0.8 0 |
41 | 418 | +2.0 0 |
245.4 |
13 | ±0.5 | 39 | +0.8 0 |
44.2 | 429 | +2.1 0 |
265.4 |
14 | ±0.6 | 42 | +0.8 0 |
47.6 | 462 | +2.2 0 |
307.8 |
16 | ±0.6 | 48 | +0.9 0 |
54.4 | 528 | +2.5 0 |
402.1 |
Diameter |
Pitch |
Inside Width Min w1(mm) |
Outside Width Min w1(mm) |
Break Load Min ( BF/KN ) |
|||
d(mm) |
Deviation |
p(mm) | P Pitch Max |
P Pitch Min |
|||
4 | ±0.16 | 12 | 12.4 | 11.6 | 5.2 | 14.8 | 20.1 |
5 | ±0.2 | 15 | 15.5 | 14.6 | 6.5 | 18.5 | 31.4 |
6 | ±0.24 | 18 | 18.5 | 17.5 | 7.8 | 22.2 | 49.8 |
7 | ±0.28 | 21 | 21.6 | 20.4 | 9.1 | 25.9 | 61.5 |
8 | ±0.32 | 24 | 24.7 | 23.3 | 10.4 | 29.6 | 80.4 |
10 | ±0.4 | 30 | 30.9 | 29.1 | 13 | 37 | 125.6 |
13 | ±0.52 | 39 | 40.2 | 37.8 | 16.9 | 48.1 | 212.3 |
16 | ±0.64 | 48 | 49.4 | 46.6 | 20.8 | 59.2 | 321.6 |
18 | ±0.9 | 54 | 55.6 | 52.4 | 23.4 | 66.6 | 407.1 |
19 | ±1 | 57 | 58.7 | 55.3 | 24.7 | 70.3 | 453.6 |
20 | ±1 | 60 | 61.8 | 58.2 | 26 | 74 | 502.6 |
Diameter |
Pitch |
Inside Width Min w1(mm) |
Outside Width Min w1(mm) |
Break Load Min ( BF/KN ) |
|||
d(mm) |
Deviation |
p(mm) | P Pitch Max |
P Pitch Min |
|||
4 | ±0.16 | 12 | 12.4 | 11.6 | 5.2 | 14.8 | 25.1 |
5 | ±0.2 | 15 | 15.5 | 14.6 | 6.5 | 18.5 | 39.2 |
6 | ±0.24 | 18 | 18.5 | 17.5 | 7.8 | 22.2 | 56.5 |
7 | ±0.28 | 21 | 21.6 | 20.4 | 9.1 | 25.9 | 76.9 |
8 | ±0.32 | 24 | 24.7 | 23.3 | 10.4 | 29.6 | 100.5 |
10 | ±0.4 | 30 | 30.9 | 29.1 | 13 | 37 | 157.1 |
13 | ±0.52 | 39 | 40.2 | 37.8 | 16.9 | 48.1 | 265.4 |
16 | ±0.64 | 48 | 49.4 | 46.6 | 20.8 | 59.2 | 402.1 |
18 | ±0.9 | 54 | 55.6 | 52.4 | 23.4 | 66.6 | 508.9 |
19 | ±1 | 57 | 58.7 | 55.3 | 24.7 | 70.3 | 567.1 |
20 | ±1 | 60 | 61.8 | 58.2 | 26 | 74 | 628.3 |